Standard® is your source for the very best in wire technology, with total coverage. You’ll enjoy effortless installations plus cutting edge technology that delivers superior power and efficient performance. For the fit, form, and function you demand, Standard® is your complete wire set resource. Using advanced technology from the inside out, we engineer our ignition wire and cable products to outlast and outperform the competition.
Standard® OE Plus Performance Professional Wire Sets feature original equipment fit, form and function. Every set is designed, built and tested to meet or exceed OE quality standards. Standard Wire Sets feature “better than OE” D.I.S. Coil Boots and OHC boots that provide better dielectric performance than the OE plastic tubes. Our wire sets contain heat shields, looms, and high-temperature silicone boots, where required, to provide advanced protection from the harsh conditions of the engine.
Standard® OE Plus Performance Professional Wire: Innovation in Engineering.
OE style magnetic suppression silicone cores provide protection from premature burnout and conductor damage failures
High-grade silicone insulation protects against core voltage leaks to ensure long service life
Silicone jacket provides thermal protection from extreme underhood temperatures and resists petroleum based contaminants for long service life
Proper Installation Angles
Heat Shield and Loom
Triple Silicone Wire
High-Temperature Silicone Boots
Coil-on-Plug systems are designed to distribute the ignition spark more efficiently to the fuel in the combustion chamber. Coil-on-Plug delivers between 30 and 60 thousand volts directly to the spark plug thousands of times per minute. The connection between coil and spark plug is made through the Coil-on-Plug boot. Standard® Coil-on-Plug boots are made up of a flexible, heat resistant outer cover
over a conductive spring that delivers the spark from coil to spark plug.
Engine environment, heat, water contamination, fuel and lubricant contamination and abrasion damage can all shorten the life of Coil-on-Plug boots significantly and may require replacement to keep an engine running efficiently. Standard® coil-on-plug boots are manufactured from the best materials for top performance and endurance – so next time you replace the engine’s spark plugs, replace the coil-on-Plug boots with Standard®.
Engineered to the specifications used by the original vehicle manufacturer for exacting fit
High-temperature material provides greater protection from thermal overload
Some of the newer engines are designed using both wire leads and direct coil-on-plug boots. Standard offers a complementary line of ignition coil-on-plug boot / wire set kits. Complete Tune-up kit includes custom fit wire set and coil-on-plug boots - everything you need in a single package to complete the job. All of the components are manufactured to the specifications required for your vehicle and are equivalent in fit, form, and function to the original so you can install with confidence.View Full Product Listing
Wire leads have specially formulated jacket materials to resist heat and chemicals for extra protection
Wire has superior RFI suppression for cellular phone communications and vehicle electronic systems
Superior dielectric strength combine with high-temperature materials for extra-protection and durability and a long service life
Tight weatherproof boot seal protects against moisture intrusion
Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
High-temperature material provides greater protection from thermal overload
Genuine Intermotor® Import Ignition Wire Sets feature original equipment fit, form and function plus! Every Intermotor® set is designed, built and tested to meet or exceed the tough international TS16949 quality standards. That’s why technicians appreciate Intermotor® factory-installed clips, loom and trays* for a flawless installation while motorists enjoy exceptional power and long service life for the
ultimate in import performance.
* Factory installed upgrades are specific to vehicle make and model
Intermotor® wire sets feature OE style import spark plug and distributor boots that look, fit, and perform like the original components. Engineered for extra-durability, long service life and a smooth installation, Intermotor® premium import boots provide the right fit and a tight weatherproof seal.
Protection and Power
Wire Core & Jacket
Power can’t flow if the wire jacket is compromised. That’s why Intermotor® developed a patented high-gloss clear coat layer that’s permanently bonded to our high-temp silicone jacket. This combination provides powerful protection from the engine heat
Clips • Trays • Loom • Numbered Leads
We’ve gone to great lengths to build an import wire set that guards against damage and creates a clear path for power.
Check out the finishing touches that make Intermotor® Import Wire the best in class.
Special Toyota mounting clip with ring insert. Difficult to get almost anywhere even at the dealer.
Special Honda mounting bracket that slides into OE frame and engine mounted brackets.
Numbered cylinder leads are a big deal, particularly for real import specialists. Most wire sets installed on new cars are numbered.
Various OE hangers, brackets and lead separators used on many import applications. Where appropriate, these are pre-installed.
OE matched spark plug boots and distributor boots. Intermotor® boots provide correct fit, are resistant to fuel and oil contamination and offer a tight moisture proof seal.
When required, clocking distributor terminals rotate to proper clock position. This eliminates crossed wire issues and provides a clean installation.
Intermotor® Ignition Wire Sets come out of the box with OE or better terminals. Intermotor® terminals use original lowcorrosion stainless steel or low corrosion brass.
It’s what's on the outside that gives Intermotor® wire its beauty, but it’s what’s inside that gives Intermotor® its import firepower.
• Primary Conductor OE exact
• Clean energy flow, ultimate
power and performance
Protective Latex Conductor:
• Protects conductor against
breakage or segmenting
• Added structural strength
Inner Silicone Dielectric Insulation:
• Superior protection for maximum flow and power
High-Temp Braid Tape:
• Bonds jacket to insulation improving tensile strength
Patented High-Gloss Clear Coat:
• Permanently bonded to jacket
• Abrasion resistance and greater protection against
High-Temp Silicone Jacket:
• Maximum thermal protection
Using the same premium components we supply to winning race teams, we’ve engineered and built an exciting line of race car and street performance wires. Taking our advanced technology from the race track and bringing it to the street, Blue Streak® wires have become a very exciting and popular brand of ignition wires.
Manufactured with extreme components such as our patented clear-coat formulation, extra-thick silicone outer jacket, fiberglass braid, Kevlar® fiber and silicone insulation, our Blue Streak® wire sets are built for superior strength and protection.
Blue Streak® brand race wires and Blue Streak® street performance wires are engineered to provide superior protection, extra-durability and maximum power for real race car and peak street performance.
Designed with superior heat protection, all Blue Streak® High Performance Race Wire Sets are engineered to handle the extreme temperatures of high-performance engines. Engineered to withstand more than 600°+F, they offer superior heat protection against boots of comparable materials. Blue Streak’s patented conductor offers low-resistance wire (15 OHM/FT) and allows for a hotter spark with greater spark duration - resulting in more power to the plug and greater combustion efficienc. Our patented wire wound ferrite core technology promotes quiet, static-free operation for high-performing electronics. And Blue Streak’s extra thick insulation provides the wire core with extra protection from engine heat, abrasion and degradation from oil-based products. All Blue Streak® wires include a patented coating that resists underhood contaminants and abrasion. This coating also reflects heat and makes the wires easy to clean so they always look great!
Kevlar (Aramid) Fibers
Ferrite Reactive Layer
Copper / Nickel Alloy
Full Fiberglass Braid
15 OHM Per Foot Core
Silicone Distributor Boot
9 MM Silicone
Silicone Coated Fiberglass
600°F+ Plug Boot
Blue Streak® Premium Street Performance Wires feature the same premium materials and workmanship as those we supply to winning race teams, but are engineered to fit street performance engine compartments. Premium Street Performance Wire kits are made to fit most engine and exhaust combinations and permits routing around headers and other performance equipment. Our semi - custom kits allow you to customize your premium street performance vehicle by creating a wire set length specific to your unique engine and routing the set around headers and other performance equipment.