The expansive Standard® sensor line is your go-to source for the form, fit and function demanded by today’s technicians.All state-of-the-art sensors are designed to meet or exceed OE specifications and to deliver exceptional performance and extended service life.

Standard® offers a broad array of sensor coverage including: Air Charge/Manifold Temperature, Accelerator Pedal,Barometric Pressure, Camshaft, Coolant Temperature, Crankshaft, Fuel Vent, Knock, Manifold Absolute Pressure, Mass Air Flow, Throttle Position, Vehicle Speed, Yaw Rate, Ride Height, Taillight, Pedal Stroke, Headlamp Leveling, Air Quality,Battery Current, Rain, Sun Load, Door Pinch, Brake Fluid, Fuel Level and many more.

New Sensors Added

New sensors

We recently added 61 new sensors to our engine management line, including 27 accelerator pedal, 12 vehicle speed, and 12 ABS speed sensors. In total, the sensor expansion covers more than 26 million vehicles on the road.

To view the full 'New Parts Spotlight', click here.

Crank Sensors

View Full Product Listing http://ecatalog.smpcorp.com/STD/#/searchparts/searchText/Crankshaft Sensor?type=p

Located in the timing cover, or on side of the block with a cylindrical portion inserted in the block, crank sensors (a.k.a. crankshaft position sensors or crankshaft sensors) set ignition timing, supply the RPM signal, and determine engine speed. Crank sensors can fail due to excessive heat, faulty wiring harnesses, and sensor movement.

To ensure durability under extreme conditions, we subject each of our crank sensors to extensive end-of-line testing, including a 48- to 64-hour-long vibration test across three different planes. For a closer look at our crank sensors, including their premium components, watch the video below:

Steering Angle Sensors

A Critical Safety Component

The Steering Angle Sensor is an important part of a vehicle’s safety system. It transmits the steering wheel’s rate of turn, wheel angle, and other important data to the specific vehicle's computer. If there is a fault in the signal, the computer can disable the vehicle’s stability control.

Signs of a Faulty Steering Angle Sensor

When a steering angle sensor fails, the vehicle may experience the following symptoms:

  • Excessive play in the steering wheel
  • Steering warning light illuminated in the dash
  • Electronic Stability Control system is disabled

A Solution to Keep Your Stability Control System Enabled

Providing quality-manufactured replacement parts for this important safety category, we offer more than 40 steering angle sensors. To see what makes our steering angle sensors the best, take a look at our SWS24:

Knock Sensors

Knock sensors create a voltage signal based on the vibrations caused by detonation. The computer uses this signal to retard timing when spark knock occurs.

View Full Product Listing http://ecatalog.smpcorp.com/STD/#/searchparts/searchText/Knock Sensor?type=p

An automated data acquisition system continuously monitors sensor output to ensure it responds with appropriate voltage at the specified frequency rate

Primary thermistor wire leads resistance welded to connector terminals to ensure a reliable electrical connection in an environment of high vibration and changing temperature

The Sensor body is precision machined to tune the resonant frequency to the engine knock frequency

The Piezoelectric disc is the heart of the sensor. It is a sintered ferroelectric ceramic disc precision ground to tight physical tolerance

All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation

Designed to respond to knock frequencies up to 1000Hz and shifts in engine knock frequency, making it more effective over a broad range of vehicle conditions

Download Product Information

Camshaft Sensors

View Full Product Listing http://ecatalog.smpcorp.com/STD/#/searchparts/searchText/Camshaft Sensor?type=p

Typically located in the engine’s cylinder head, camshaft sensors determine which cylinder is firing in order to establish injector synchronization and coil firing sequence in DIS systems. The sensors can fail due to extreme temperature, contamination, and wear and tear. 

To protect against failure, Standard and Intermotor manufacture camshaft sensors using premium components such as a fluorocarbon rubber oil seal that ensures a secure fit and advanced circuitry that protects against electromagnetic interference such as stray electro-magnetic fields, power spikes, and static electricity

Plus, to ensure durability and longevity, Standard and Intermotor subject each camshaft sensor to extensive end-of-line testing, including a 48- to 64-hour-long vibration test across three different planes.

Coolant Temperature Sensors

The Coolant Temperature sensor changes resistance with the temperature. The Coolant Temperature sensor is critical to many PCM functions such as fuel injection, ignition timing, variable valve timing, and transmission shifting.

View Full Product Listing http://ecatalog.smpcorp.com/STD/#/searchparts/searchText/Coolant%20Temperature%20Sensor?type=p

100% factory tested proper resistance value at specified temperature

Primary thermistor wire leads resistance welded to connector terminals to ensure a reliable electrical connection in an environment of high vibration and changing temperature

Precision machined brass housing to maximize thermal conductivity between sensor body and coolant

Glass fiber reinforced plastic polymer connector insures excellent dimensional stability and proper mating connector fit over a wide range of temperature extremes

Housing has tapered pipe threads for a tight fit in the mounting location

Grease is applied inside brass housing to facilitate heat transfer with thermistors

Accelerator Pedal Sensors

The accelerator pedal sensor assembly combines the familiar accelerator pedal with a dual output sensor for a drive by wire application. The ubiquitous throttle cable is replaced by a pedal position sensor to continuously measure driver input.

View Full Product Listing http://ecatalog.smpcorp.com/STD/#/searchparts/searchText/Accelerator%20Pedal%20Sensor?type=p&search=s

High impact ABS plastic provides the best solution to pedal support and spring guide components

Pedal sensor assemblies are 100% tested for output versus pedal position. The slope and linearity of the two separate outputs are accurately checked to ensure correct operation on the vehicle

High strength nylon provides the best solution to pedal support and spring guide components

The multi-finger wiper design accurately controls sensor contact to within a few grams of force

Dual return springs provide redundancy and a comfortable, familiar pedal force profile

Several polymers are used in the construction of the assembly to provide the best combination of strength and support for the spring guide components

Download Product Information

Air Charge / Manifold Temperature Sensors

The Air Charge/Manifold Temperature sensor is used by the computer to measure air density for fuel mixture control.  The computer uses this information to trim the air/fuel ratio according to the air density.

View Full Product Listing http://ecatalog.smpcorp.com/STD/#/searchparts/searchText/Air%20charge%20temp%20sensor?type=p&search=s

100% factory tested to ensure trouble-free performance

Sensor design specifies tight tolerance thermistor response values to assure accuracy of the temperature measurement and proper part operation

Download Product Information

Air Bag Clock Springs

An Air Bag Clock Spring is an assembly that contains a spirally wound flat ribbon to allow the steering wheel to be turned while maintaining a constant electrical connection to the driver airbag, horn and other electrical steering wheel mounted controls.

View Full Product Listing http://ecatalog.smpcorp.com/STD/#/searchparts/searchText/Clock%20Spring?type=p

A defective or failing Airbag Clockspring will not affect engine operation but will trigger the SRS light indicating compromised vehicle safety

Manufactured from the finest materials and to the highest standards, producing a quality product with an extended service life

Meet or exceeds the OE for fit, form, and function delivering a flawless install and precision performance

Clockspring removal should be done by a professional and only after the battery has been disconnected followed by a timed electrical system discharge

Complete coverage for import and domestic vehicles with over 100 sensors

Download Product Information

Anti-lock Brake (ABS) Sensors

The anti-lock braking system uses an ABS or wheel sensor to monitor the wheel speed and send this information to the ABS computer. The ABS computer uses this information to prevent the brakes from locking during a stop.

Standard ABS sensor line has complete coverage for domestic and import applications with over 2100 ABS numbers cataloged – and growing.

View Full Product Listing http://ecatalog.smpcorp.com/STD/#/searchparts/searchText/ABS%20%2f%20Vehicle%20Speed%20Sensor?type=p

OE connectors and terminals are used to ensure accurate, water-tight connection to the engine wire harness

Grommets and wire clips are included on the harness to ensure proper mounting and routing within the car chassis

Sensor housing is made from high quality glass reinforced plastic resin with both high temperature and environmental protection resistance

Wire harness comes with protective sleeve to prevent wires from chafing and creating short circuits

Sensors are 100% tested for proper functioning

Download Product Information

What makes Standard® ABS Sensors the best.

  • The ABS sensor is typically located in each wheel hub/rotor on a four channel ABS system.Some rear wheel drive applications have the sensor mounted in the rear differential
  • Generally these sensors will fail as a result of clogging from metallic debris, brake dust or dirt due to exposure to the harsh elements
  • A failing sensor can illuminate the MIL or ABS warning lamp, and may cause failure of the anti-lock braking system to operate safely and properly
  • An ABS sensor can be visually inspected and the wire winding and sensor harness can be tested for opens, shorts and proper factory specified resistance with an ohmmeter

ABS Sensors Testing – See how the rest of the pack stacks up

We left no stone unturned; performing extensive laboratory and real life testing that included measuring and comparing shaft speed vs. delta voltage, output voltage and variation to OE, magnetic field strength, air gap, output wave form, pulse width as well as a complete physical product comparison to OE.

The Findings

Competition ABS Sensors

  • No Consistency in signal output performance.
  • Inferior materials in the magnetic circuit which results in low voltage output and can lead to ABS system failure.
  • No Consistency in critical sensor dimensions which establish the gap between the sensor tip and target wheel which can lead to the sensor tip hitting the spinning target wheel causing sensor damage.
  • Inadequate quality inspection and product testing.
  • No Consistency in matching OE for form, fit and critical function.

Standard®: ABS Sensor# ALS1333 (GM 02-95; ranked in the top 10 sellers) matches OE for output voltage, resistance, trigger wheel gap and all critical fit, form, and function measurables.

Competition: 29%-51% lower voltage output when compared to OE leading to potential ABS system failure. Incorrect mounting bracket does not match OE.

Standard®: ABS Sensor# ALS198 (Ford 09-95; ranked in the top 10 sellers) matches OE for output voltage, resistance, trigger wheel gap and all critical fit, form, and function measurables.

Competition: 45%-74% lower voltage output when compared to OE leading to potential ABS system failure. Inconsistent winding resistance, electrical inductance and magnetic field orientation resulting in poor sensor performance. Inconsistent gap between sensor tip and trigger wheel leading to potential sensor tip damage.



Brake Pad Wear Sensors

The Brake Pad Wear sensor, or brake wear indicator, is an added safety feature on many vehicles used to warn a vehicle’s driver if their brake pad’s thickness becomes too low and their useful life is short. Brake Pad Wear Sensors are designed to “fail” as brake pads wear. They should be changed whenever the pads are replaced or when the vehicle’s warning light indicates.

Intermotor® offers a broad product offering for import brake pad wear sensors.

View Full Product Listing http://ecatalog.smpcorp.com/STD/#/searchparts/searchText/Brake%20Pad%20Wear%20Sensor?type=p&search=s

More than 100 SKUs cover over 2,500 direct applications

Intermotor® Brake Pad Wear sensors are direct OE replacements with perfect fit, finish and function for flawless operation

Download Product Information

Camshaft Synchronizer Assemblies

The Camshaft Synchronizer Assembly consists of a Camshaft Position Sensor mounted on an Oil Pump Intermediate Shaft. The Synchronizer is driven off the camshaft, and sends the camshaft rotational position information to the Powertrain Control Module (PCM) to establish injector synchronization and coil firing sequence in DIS systems.

View Full Product Listing http://ecatalog.smpcorp.com/STD/#/searchparts/searchText/Camshaft%20Synchronizer?type=p

Includes a synchro positioning tool to ensure that the fuel and ignition systems stay in tune with the engine

Complete assembly includes a Camshaft Synchronizer and Camshaft Position Sensor, for an easy, fast installation

Brand new assemblies (not reman) match the original for fit, form and function, ensuring proper operation and performance

100% environmental, endurance and life cycle laboratory tested for timing, pulse width, and signal amplitude ensures consistent performance

Download Product Information

Mass Air Flow (MAF) Sensors

Mass Air Flow (MAF) Sensors are precision components that measure the amount of airflow entering the intake manifold and must communicate clearly with the Engine Control Module (ECM). Remanufactured MAF sensors with debris from prior use can hinder this communication and cause the vehicle to experience drivability issues. 

To ensure accurate airflow, precise performance, and longer service life, Standard® and Intermotor® offer a higher-quality alternative:  a line of 100% NEW, never remanufactured, MAF Sensors

Click here to learn more

Platinum RTD sensor
welded to Monel leads

for superior corrosion resistance
and unsurpassed joint strength

Thicker wall
for extra durability

100% computer
testing for all sensors
using advanced
Choked Airflow
Calibration and
Test System

Electro Static Discharge
(ESD) protection

Components capable of operating under extreme conditions ranging from
-40°F to 257°F

Upgraded components
improve circuit reliability
and performance

Every sensor matches OE output
and performs to specific application conditions

MAP (Manifold Absolute Pressure) Sensors

The MAP sensor converts engine vacuum/manifold pressure to an electrical signal so the computer knows how much load the engine is under. This data is the basis for fuel delivery and timing control.

View Full Product Listing http://ecatalog.smpcorp.com/STD/#/searchparts/searchText/Map%20Sensor?type=p

Precise automated wire bonding equipment and inspection processes for repeatable and reliable electrical connections

100% tested prior to shipping for sensor output voltage vs. pressure and response function

The case is high temperature glass reinforced plastic and is designed to create a hermetically sealed cavity for the sensor on one side with the port for pressure on the other

100% tested during the manufacturing process for electronic component assembly and connectivity

Download Product Information

Throttle Position Sensors

The Throttle Position sensor moves with the throttle and sends a voltage signal to the computer indicating throttle angle and speed of movement data. The computer uses this data to measure engine load, adjust timing, fuel delivery, EGR, converter clutch operation and clear flood mode.

View Full Product Listing http://ecatalog.smpcorp.com/STD/#/searchparts/searchText/Throttle%20Position%20Sensor%20(TPS)?type=p

Throttle Position Sensor on
Electronic Throttle Body

The integrated circuit (IC) is capable of measuring the rotation of a small magnet attached to the throttle shaft and is calibrated to provide accurate, linear output characteristics

Automated test equipment is used to calibrate and electronically lock output voltage accuracy, linearity and slope versus throttle angle

The sensor is sealed from the under hood environment by a custom, elastomeric seal that provides an effective barrier from dust, vapor and liquids found under the hood

The magnet is molded into a high performance polymer to ensure consistent location and low friction with the bearing surfaces

Download Product Information

Vehicle Speed Sensors

The Vehicle Speed sensor or VSS measures transmission/transaxle output or wheel speed. The ECM uses this information to modify engine functions such as ignition timing, Air/Fuel ratio, transmission shift points, and to initiate diagnostic routines.

View Full Product Listing http://ecatalog.smpcorp.com/STD/#/searchparts/searchText/Vehicle%20Speed%20Sensor?type=p

steel drive

Internal bearing promotes trouble free operation and provides stable air gap between trigger element and sensor

Output signal
match to OE

Silicone connector seal retains flexibility and preventes moisture intrusion

Measures transmission/transaxle output or wheel speed and uses this information to modify engine functions such as ignition timing, AF ratio and transmission shift points

Fluorosilicone seal for excellent sealing over a wide variety of temperature conditions

100% end-of-line testing for signal waveform ensures consistent product reliability and performance

Download Product Information

Yaw Rate Sensors

A Yaw Rate Sensor (or rotational speed sensor) measures a vehicle’s angular velocity about its vertical axis in degrees or radians per second in order to determine the orientation of the vehicle as it hard-corners or threatens to roll-over.

By comparing the vehicle’s actual yaw rate to the target yaw rate, the on-board computer can identify to what degree the vehicle may be under- or over-steering, and what corrective action, if any, is required. Corrective action may include reducing engine power as well as applying the brake on one or more wheels to realign the vehicle.

Standard® leads the way

The yaw rate sensor is a key component in a vehicle’s stability control or electronic stability control system designed to provide motorists with increased safety, security, and control even in the most difficult driving conditions.

Standard® leads the way, delivering these high-quality, high-technology sensors.

View Full Product Listing http://ecatalog.smpcorp.com/STD/#/searchparts/searchText/YAW%20Rate%20Sensor?type=p

Wide measuring range for effective sensor operation

1 Mbaud/s CAN-signal output for precise performance

Robust product design delivers dependable service life

Download Product Information


The automotive market today includes over 40 vehicle makes, over 400 models and countless variations of those models. Vehicle manufacturers continue to expand electronic componentry as well as the vast array of products needed to service these systems. These additional category opportunities have led to the development of TechSmart®.

TechSmart® is an exciting new brand of enhanced engine control products developed for the professional service technician. TechSmart® was designed to help the technician with new technology, new categories, and problem-solving improvements to the original with a proven quality they can trust.

TechSmart® encompasses Standard® innovation, engineering expertise, superior product quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity. The qualities that have made Standard® the engine management industry leader for more than 90 years, are at the heart of every TechSmart® part.

The HVAC control module monitors the outside air quality while in AUTO mode using the Air Quality Sensor. There are 2 sensors inside the air quality sensor assembly. A hydro-carbon (HC) sensor that is used for detecting gasoline exhaust fumes and a Nox sensor that is used for detecting nitrous oxide or diesel exhaust fumes. When air quality around the front of the vehicle is poor, the air quality sensor system will send a signal to the HVAC system to begin operation.

TechSmart® offers the aftermarket's best premium Air Quality Sensors, ensuring that when a TechSmart® sensor is installed it means problem solved!

TechSmart® delivers a line of proven-quality Automatic Headlight Sensors. Automatic headlights eliminate the need for the driver to manually switch the headlights on or off. They are activated using a photoelectric sensor that senses lighting conditions at dawn or dusk. When the lighting conditions become too low, the Automatic Headlight Sensors turn the lights on, increasing visibility for the driver.

Trust TechSmart® for a proven-quality solution when replacing this important safety feature.

TechSmart® offers a line of premium Headlight Level Sensors that work with a vehicle's self-leveling headlight system that adjust the headlight height in relation to the vehicle height. If the vehicle's trunk is loaded and the rear is sagging, the vehicle’s lights may shine high. Functioning headlight level sensors adjust to compensate for the rear being low. When the OE sensor fails, headlights will either shine too high or too low, creating a potentially dangerous driving situation for you and other drivers.

Trust TechSmart® to provide the highest-quality replacement solution for a failed Headlight Level Sensor.

TechSmart® offers a line of Humidity Sensors for late model import applications. Humidity sensors work with the vehicle's HVAC system to sense the humidity levels in the cabin and send a signal to the automatic climate control to begin operation.

Always replace a failed humidity sensor with a premium TechSmart® sensor to maintain comfort and proper HVAC operation.

TechSmart® offers a line of OE-specific premium Park Assist Sensors, also known as back-up sensors. TechSmart® Park Assist Sensors are 100% matched to the OE body style. Each park assist sensor is guaranteed to fit and perform just like the original. Each TechSmart® sensor connector is molded into the body just like the OE.

Count on TechSmart® to provide proven-quality solutions for these key safety elements.

Also available from TechSmart®, is our line of premium-quality Rain Sensors. Automotive rain sensors measure the amount of light being reflected and sent back to the sensor. If the glass is wet, less light makes it back and the sensor sends a signal to the wipers to operate. This eliminates the need to constantly adjust the wipers for misty or intermittent rain situations.

With a new Rain Sensor from TechSmart® you will keep your wipers operating efficiently and safely for the long haul.

Adding to TechSmart’s® growing line of advanced technology sensors comes our Sunload Sensors. The Sunload Sensor works with the HVAC temp sensor located in the passenger compartment. If the sensor detects a high sunlight condition, it will signal the fan to come on at a higher-than-normal level to maintain in cabin temperatures.

Keep comfortable with premium-quality TechSmart® Sunload Sensors.

When an OE transmission oil temperature sensor fails it can affect drivability, transmission service life, and comfort. Often the motorist will complain that the transmission is making a loud noise, the vehicle shifts hard, and the transmission will not shift into overdrive mode. The TechSmart® transmission oil temperature sensor provides the technician with a high-quality, cost-effective, direct replacement for the failed OE part.

If your Ram 5.9L or 6.7L  Cummins powered truck gets a P0106 code or exhibits excessive exhaust smoke and higher exhaust gas temperatures than normal, it may be the Turbocharger Speed Sensor causing the problem. The ECM interprets the signal from the vehicles Turbocharger Speed Sensor to monitor operating speed and determine if the turbo is functioning properly.  If the sensor fails and the turbo falls out of normal operating spec this could result in a very costly turbocharger replacement.  Replace a failed Turbocharger Speed Sensor with a high quality direct replacement TechSmart unit and prevent unnecessary repair bills.